Just like most other types of HVAC mechanical units, the swamp cooler is prone to undergo the tear and wear process to its different parts. Your swamp cooler will have minimal or no use at all during the winter season. Most parts like the water reservoir, air pumps, fun and electrical connections can be damaged or broken during the long storage of winter season. Having some information on the most common evaporative cooler repairs can get you prepared mentally and budgetwise, not forgetting that you can have some insights on how to avoid these problems in future. Below are some common repairs to common problems associated with the swamp cooler.
#1 > Water Leaks
The most common problem associated with swamp cooler installation is leaks, which occur when the water used in evaporative cooler leaks from some part of the unit such as the reservoir or the float valve. A broken water valve can impede the easy flow of water into the reservoir, make necessary replacements. The first thing you ought to do is to identify where the leak is. Check for cracks or holes around the leaks. Another major cause of leaks is the float valve.
#2 > Fan Problems
Damaged or corroded fan paddles may cause the fan to break down. A damaged fan results to performance problems with the evaporative cooler since the unit is unable to efficiently circulate cooled air throughout the room. Swamp cooler fan repairs include motor repairs, cleaning, and replacement, which may require a professional contractor to fix.
#3 > Damaged Belt
Belt damages can be the root cause of insufficient air flow. Check to see if the belt is tight enough and may only require being tightened. A damaged belt on the ventilator motor may, however, need to be replaced. On insufficient air flow, issues to do with the unit’s location may be the cause. Adequate clearance should be done to allow proper ventilation. Also, ensure those windows are open in cases where exhaust ducts are not installed.
#4 > Cleaning and Mold Removal
You will notice a musty odor which may be as a result of the swamp cooler being left in the storage for long during the winter season, molds and mildew do occur especially in the reservoir. This is a common problem as to not so many people know how to winterize their swamp coolers after installation. The removal of molds should be done with all precautionary measures in place. Molds can be hazardous to human health and therefore one should be careful when performing the task of cleaning molds. When cleaning, ensure that you have unplugged the cooler from the power source to avoid cases of electrocution. Scrub the inside of the evaporative cooler with a combination of vinegar, bicarbonate soda and water.
#5 > Blown Fuse
In most cases, a blown fuse causes the swamp cooler not to start or function. However, a tripped breaker or faulty wiring may also make the unit not to start, so be sure to check for a tripped breaker before calling a professional to repair your unit.
With evaporative cooling gaining popularity, it has been proven that swamp coolers are significantly more energy efficient when used to cool our homes. The above are just but a few swamp cooler problems that consumers call evaporative cooler repair services for. It’s always best to observe proper maintenance at all times and call a professional evaporative cooler repair company whenever you experience a problem and have it fixed ASAP before it becomes something bigger and more complex.